Sewing Darts, How to Sew Darts Easily

Sewing darts is one of the most important skills for shaping garments and creating a professional fit. If you’ve ever wondered how to sew darts for beginners, this step-by-step guide will walk you through everything you need to know. Darts remove excess fabric and create natural curves in clothing and bags, helping flat fabric transform into 3-dimensional, well-fitted pieces. Once you understand the technique, sewing darts becomes quick, accurate, and surprisingly easy.

What are Darts in Sewing?

Darts are tucks in clothing and other sewn items designed to give shape. In clothing, darts are typically found in the bust area, waistline, and even at the back for really fitted items. In bags and clutches, darts are placed at the bottom corners to give shape and depth to an otherwise flat design. Read all about the different types of darts for sewing.

Sewing darts give a 3-dimensional shape to your clothing and bag sewing projects. They can also be used as part of the design, particularly in asymmetrical garments. Regardless of where darts are placed, they need to be well-sewn to blend into your design and give the necessary curved shape. Follow these simple steps and learn how to sew darts correctly.

Supplies Needed to Sew Darts

• Marking Tool – You can use tailor’s chalk, removable markers or a tracing wheel and carbon paper.
• Pins
• Ruler
• Sewing Machine
• Iron and Ironing Board

How to Sew Darts (Step by Step)

Here is how to sew darts:

Step 1 – Transfer the Dart Markings

Transfer the dart marked on your pattern piece onto the wrong side of the fabric. All marking should be done with a tailor’s chalk or removable pen since you don’t want it to show in the final product.

3 ways to mark darts:

1. Dressmaker’s carbon and a tracing wheel.
2. My favorite method for marking when sewing darts is to slash the pattern along one side of the dart and fold it open. Then you can easily draw the dart legs. If you are precious about your pattern, then stick the cut up afterward.
3. Pins can be used to mark key points in the dart and then join the points at the end.

Here is a commonly shaped bodice with the bust and waist darts marked. Remember, all marking should be done on the wrong side of the fabric. My fabric sample looked quite similar on both sides, while yours may not.

Step 2 – Mark Center Dart

The next step in sewing darts is to mark along the middle of the dart.

Fold the dart in half, with fabric RIGHT sides together, along your marked middle line, and pin in place. Advanced sewers can probably just fold the dart in half without marking. In some patterns, this centerline may be marked, but most often, it is left blank.

Using vertical pins will hold the dart in place nicely. Always place the last pin at the point of the dart. This way, you can use it as a visual guide when sewing.

Step 3 – Sewing Darts

Time to start sewing darts! Start stitching with a straight stitch from the outside edge (widest part of the dart) of the fabric inwards towards the point.

1. Use a medium stitch length (2.5). Remove the pins as you stitch.
2. About 1 inch (2.5cm) from the end, change your stitch length to 1.0-1.5. This will create a smoother, less puckered and stronger dart.
3. When you get to the end of the dart point, don’t backstitch. Just leave a long tail of threads. Knot the tail threads being careful not to pull too tight and cause puckering.

Step 4 – How to Press Darts

When sewing darts, it is important to know that the darts should be pressed in certain directions. As a general rule, horizontal bust darts are pressed downwards, and vertical darts like those around the waist of skirts or pants are pressed towards the center. For most of my bag sewing patterns, I recommend you press the darts toward the center.

Use a tailor’s ham to get a nice shape at the point. A tailor’s ham is a pressing tool that looks like a small stuffed cushion that can be used for pressing curved areas like darts.

Clipping After Sewing Darts

Shallow darts are generally just pressed and not clipped. Deep darts, however, may have the excess fabric trimmed or clipped to the seam allowance. If you trim the dart to reduce bulk, you may need to finish the raw edges so they do not fray. The disadvantage of finishing the edges is that the edge of it may show on the right side as a series of bumps.

Bag and clutch darts are often trimmed since you will be sewing thicker or interfaced fabrics, and a lining is added at the end that will hide any mess. Curved sewing darts will need to be clipped to prevent puckering and pulling.

Sewing Double Darts & Diamond Darts

Step 1 – Mark the Double Dart

Transfer the dart marked on your pattern piece onto the wrong side of the fabric. Mark along the middle of the dart with your tailor’s chalk. Once you gain confidence, you will be able to skip to the next step without marking the center.

Step 2 – Fold and Pin

Fold the dart in half along your marked middle line and pin it in place. Use vertical pins to hold the fabric securely in place. Place a pin at both points of the dart so you have an easy reference when you start sewing.

Step 3 – Sewing Darts

Start stitching just before the middle of the dart and sew towards the first point using a medium stitch length. (2.5-3.0) Remove the pins as you stitch. Change to a stitch length of 1.0-1.5 for the last 1 inch (2.5cm).

When you get to the end of the point, don’t backstitch. Just leave a long tail of threads and knot them off, being careful not to pull too tight and cause puckering.

Start again in the middle and repeat for the other side.

Step 4 – Clipping Double Darts

You may need to cut through the middle of the dart so it doesn’t pull. Your pattern would normally specify this.

Sewing Darts in Clothing

Bust darts may be placed horizontally or diagonally or even transferred to the neck or waist area. Here are a few possible positions. This is by no means exhaustive. You can sew endless combinations and make the dart positions a creative feature.

Darts vary in depth and length depending on the fit and tightness of the garment. Tighter clothing needs longer and deeper darts. In most patterns, the darts are straight and horizontal but in more advanced patterns, you may find ones that are curved. All these dresses have darts to give them shape and fit either the bust or waist.

Without sewing darts, clothing needs to be oversized, boxy or have pleats or gathering added to give shape. Stretch fabric can also be used with no darts since the stretch properties will give shape and fit to the garment. These photos show clothing that don’t use darts.

How to Sew Darts FAQs

Pin for Later

Sewing Darts – In Conclusion

Once you understand how to sew darts, you’ve unlocked one of the key skills for creating well-fitted, professional-looking sewing projects. Darts are what turn flat fabric into shaped garments and structured accessories, and even small adjustments in stitching can make a big difference to the final fit.

Whether you’re working on clothing with bust or waist shaping, or adding structure to bags and clutches, the key is accuracy and a smooth finish—especially at the dart point. With careful marking, gradual stitching, and proper pressing, your darts will blend neatly into your design instead of standing out.

Like most sewing techniques, darts get easier and more intuitive with practice. Once you’ve sewn a few, you’ll start to see how they can be used not just for shaping, but also as a subtle design feature in your projects.

More Beginner Sewing Articles:

• Sewing 101
• Sewing Projects for Beginners
• How to Sew